Niall’s virtual diary archives – Wednesday 5th November 2014

by . Last updated .

Wednesday 5th November 2014: 2.57pm. Link shared: http://smartmontools.sourceforge.net

Started seeing hard read errors on the cloud node in the ZFS mirror set recently. Turns out my oldest hard drive in that cloud node (excluding the Samsung 830 SSD, I don't think that will ever get old) at a venerable 1.92 years of being switched on has started to see Raw Read Errors. Poo, that means I'll need to replace it, it's so tedious :(

Still, I once again have much gratititude to FreeNAS for regularly testing drives every two weeks for this stuff and emailing me to tell me of the problem, and of course it's on a mirror pair, so no data loss is expected.

ned@milla:~$ sudo smartctl -a /dev/sde
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-2.6.32-33-pve] (local build)

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD30EFRX-68AX9N0
Serial Number:    WD-WMC1T0072257
LU WWN Device Id: 5 0014ee 058ae5dcd
Firmware Version: 80.00A80
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   9
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Nov  5 14:30:04 2014 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       15390
  3 Spin_Up_Time            0x0027   182   178   021    Pre-fail  Always       -       5900
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       82
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       16867
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       53
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       30
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       51
194 Temperature_Celsius     0x0022   122   105   000    Old_age   Always       -       28
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     16865         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Go back to the archive index Go back to the latest entries

Contact the webmaster: Niall Douglas @ webmaster2<at symbol>nedprod.com (Last updated: 2014-11-05 14:57:21 +0000 UTC)